|Sheet Thickness:||0.2-1.8mm||External Dimension:||16500mm * 2200mm * 2600mm|
|Plastic Process:||PVC Particle||Specification:||16-800mm|
|Electronic Parts:||ABB / Rkc / Omron / Siemens||Motor:||Siemens|
plastic pipe extrusion machine,
plastic pipe making machine
Electricity Conduit Tube Water Sewage extrusion process plastic extrusion equipment
Description of PVC pipe machine production line
1. PVC pipe extrusion line is mainly used in the production of pressure water pipes, agriculture irrigation, building or city drainage and Sewage and constructional plumbing cable laying etc.
2. The unit consists of Conical twin screw extruder, PVC pipe mould-Vacuum calibration tank-Haul-off machine-Planetary Saw Cutting machine-Tripping table/Belling machine. Producing pipe diameter range: Φ160mm-Φ400mm.
3. And the line can be equipped with comptroller thickening instrument, computer ink-jet printer, crusher, shredder, pulverizer, water chiller, air compressor etc. to achieve the production and manufacture of high-grade tubing.
4. Advanced design for screws and barrel supplies powerful safeguard for the PVC plasticization.
1 . Plastic pellets are fed into the barrel of the extruder and conveyed by the screw, the heaters which are outside of the barrel of the extruder as well as the friction from the rotation of the screw melt the plastic pellets into a sheet mold and then placed on a three-roll calender.
2 . The produced sheet goes through the bottom and middle roll,wrapping around back of the middle roll and then back to the top roll or other methods as shown in sheet calender picture, these rolls are helpful to take the heat out of the sheet.
3 . After the sheet comes off the roll,it moves down the conveyor to the end of sheet line where the edge trimmer cuts the sheet to width as well as a sheet shear cutter to length.
Product Sheet Line Detail
|Max .width of product||mm||1220|
|Thickness of product||mm||2-5|
|Model||Pipe range(mm)||Extruder model||Capacity(kg/h)||Speed(m/min)|
Contact Person: Mr. Zhao