|
Product Details:
|
| Hopper Dryer: | Plastic Dehumidifier | Plastic Machinery: | Plastic Dehumidifying Dryer |
|---|---|---|---|
| Plastic Drying Machine: | Plastic Granulate Dryer | Voltage: | 220V |
| Down Blown Dryer: | Hot Wind Dryer | Condition: | New |
| High Light: | heat transfer printing machine,plastic hopper dryer |
||
High Quality 200kg Industrial Plastic Hopper Dryer Machine profile production line
High Quality 200kg Industrial Plastic Hopper Prodcut Features
1. The whole body of the hopper is made of stainless steel, and both inside and outside surface are specially polished.
2. Unique design, no dust, easy cleaning, it is specially applicable to production of optical and food grade product.
3. Unique filter screen at the air suction end in hopper can avoid blockage in air pipe caused by material.
4. Air filter at the blower is as standard, no dust in dry air, thus greatly reduce defects rates.
5. Material window in hopper and base makes it convenient to observe the material usage in the hopper.
6. Hopper wall is specially embedded with thicken insulating layer, together with down-blow hot air pipe design, the hot dry air is evenly sprayed and little will be lost. Drying efficiency is greatly improved.
7. Overheat protection device makes machine run safely and reliably.
8. Low energy consumption, environmental friendly.
Description
1. Material-contact surface made of stainless steel to eliminate material contamination.
2. The closely casting aluminum shell ensures excellent insulation.
3. Hot air inlet elbow design can effectively avoid burning caused by dust piling up at the bottom of the pipe heaters.
4. The hopper design is convenient for cleaning and material change.
5. Accurate temperature controller guarantees easy control of temperature.
6. Dust-proof mute blower prevents dust from polluting material.
Detail
1. Auto-timer adds"T" to the back of the model;
2. Magnetic base, adds "M" to the back of the model;
3. Double insulated layers,adds "I" to the back of the model;
4. 180 high temp. Model,adds "H" to the back of the model;
5. Change into single phase voltage,adds"S" to the back of the model(apply to THD-12);
6. About loading capacity is based on pellet material of 0.65 in density and in diameter;
7. Power:3Φ,380V,50Hz.
Model |
Heater Power (kw) |
Blower (kw) |
Hopper Capacity |
Measurement (mm) H*W*D |
Floor Stand (mm) H1*W1*D1 |
Overall Height (mm) |
Air Inlet Pipe (inch) |
Air Outlet Pipe (inch) |
Weight (kg) |
|
L |
kg |
|||||||||
OHD-40-O |
2.5 |
0.12 |
40 |
25 |
760*790*394 |
790*450*550 |
1300 |
2.5 |
2 |
70 |
OHD-80-O |
4 |
0.17 |
80 |
50 |
940*885*472 |
840*730*560 |
1480 |
2.5 |
2 |
85 |
OHD-120-O |
4 |
0.17 |
120 |
75 |
1210*885*472 |
840*730*560 |
1740 |
2.5 |
2 |
100 |
OHD-160-O |
6 |
0.2 |
160 |
100 |
1225*822*575 |
920*652*795 |
1825 |
2.5 |
2.5 |
90 |
OHD-230-O |
6 |
0.2 |
230 |
150 |
1505*822*575 |
920*652*795 |
2105 |
2.5 |
2.5 |
100 |
OHD-300-O |
12 |
0.25 |
300 |
200 |
1450*945*695 |
970*790*930 |
2085 |
3 |
2.5 |
130 |
OHD-450-O |
12 |
0.25 |
450 |
300 |
1850*945*695 |
970*790*930 |
2435 |
4 |
3 |
160 |
OHD-600-O |
18 |
0.25 |
600 |
400 |
1820*1170*915 |
1130*1000*1200 |
2470 |
4 |
3 |
200 |
Product Display
Contact Person: Mr. Zhao
Tel: 0086-0512-58601008
Fax: 86-512-58609910
